1 / 3
Salsa Cowbell Bike Drop Bar Expansion Cap (ID 21mm or 13/16") — zdjęcie 1
1 / 3

Salsa Cowbell Bike Drop Bar Expansion Cap (ID 21mm or 13/16")

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Expansion cap for the Salsa Cowbell Bike Drop Handle Bar (or really any handle bar with 21mm or 13/16" ID)

Ocena
0 / 5
Polubienia
9
Pobrania
19
Wydruki
0
Wyświetlenia
180
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The drop bar end caps that came with my Salsa Journeyer were waaay too loose and I lost both on my first ride. I designed these with an expansion mechanism (similar to a carbon fork compression plug or an old-school quill stem).

Hardware:
2x M3x35 (you can probably get by with a 30mm as well). Either socket head or button head screws should fit on the counterbore.

2x M3x4x5mm heat set insert

 

All parts should print flat on the bed and won't require supports. I printed it with the ASA I had loaded on the printer, but PLA should be plenty strong.

Tagi