MJX Hyper Go 14301 Wheels for Tamiya 60D tires
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wheels you can stretch Tamiya Mini Chassis 60D tires onto to use on your Truck
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 695
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This wheel accepts Tamiya Mini Cooper M-Chassis 60D tires and allows you to run them on the MJX Hyper Go 14301. This gives a few more tire options for the car as well as some extra clearance if you want to add adjustable upper control arms (see my other models).
Diameters
- Wheel Max diameter: 45mm
- Wheel Width: 24.2mm
- Wheel Inner diameter: 37.4mm
- Tire mounting flange diameter: 40.5mm
- Tire outer diameter: 60mm
Material
The wheels mounted to the car in the picture are ABS, and they have taken some damage and chipped a bit. The wheel in the foreground is Polymaker CoPA (a nylon blend), which should be an ideal choice for these. Alternatively, PETG should have many of the same properties useful to these parts, but I haven't tested it.
Tires
This wheel is designed to use the TAMIYA M-Chassis 60D Radials Tires with the corresponding foam insert, and they grip very well on cement. Note there are several differnt tires available for the Mini, but the corresponding part numbers I know of at the time of publication are : 50683, 50684, 54995, and 54999
Files
- MJX Hyper Go 14301 60D wheel: This is the normal print that requires supports for the central hub, but once those are removed, the wheel is ready to be used
- MJX Hyper Go 14301 60D wheel - no supports: This model has a 0.2mm thick bridge for the first layer of the central hub and should print successfully without supports, but once completed, you will need to pierce the hole and clean it up.