1 / 3
Printsheet holding clips for Felix Tec4
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print clips for holding the printsheet.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As i have two printsheets i came up with those clips for an easy storage solution. they are not perfect but do their job good enough.
I created them for my Felix Tec4 but they should work for any 40x40 extrusion and printsheets with maximum 1 mm thickness.
i used P1 and P2 at the bottom to hold the printsheet and P3 on top to stop the vibration while printing.
In the process of making them i also made P4 and P5. I have no use for them but maybe someone else.
Layer height is as you like but i recommend at least 20% infill for stability.