1 / 2
Sandpaper Dremel Bit V4
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple cilindrical bit for your dremel to hold the sandpaper
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 439
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
In the picture there is the V3 body with a slid to fit sandpaper in.
At least with the 1000grit sandpaper i tried the slid doesnt hold it well enough and the lid is needed anyway. With lower grit it might hold, otherwise the V4 body is probably better overall.