Fractal Design Raspberry Pi 5 + Pineberry Bottom NVME
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Raspberry Pi 5 and Pineberry NVME Bottom hat case (might work with other bottom hats).
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 318
- Wydruki
- 1
- Wyświetlenia
- 3442
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
I saw this Fractal case on LevelOne Techs podcast. Fractal are not making it and after seeing a 3D printed one that TechX made (https://www.printables.com/model/910464-tiny-pc-raspberry-pi-5-case-with-wooden-front) I decided to have a go as I wanted one that worked with the Pineberry NVME bottom hat.
So Autocad file is there for you to modify (so Fusion skills are not great).
To fit the board you will need 4 * M2.5 12 or 14mm screws to fit through the spacers and into the 3D printed bosses in the main case. You also need some CA glue to fit the feet and front slats. The side panel might need a couple of drops of glue but my BambuLab P1S prints the file and it is a lovely fit (2 sides are chamfered to aid in fitting). The front panel is a tight fit and I used a spudger to lever it in.
The main body of the case needs supports, the other parts don't.
Anyway hope it is of use and any feedback is welcome.