Litter Genie/Diaper Genie/flower pot stand on casters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A caster stand for your Litter Genie/Diaper Genie/flower pot/any flat object.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stand that will support a Litter Genie XL, regular Litter Genie, Diaper Genie, or any other flat bottomed object like a flower pot. It is BIG - it took up basically the entire bed of my Creality K1 - but it is stable and steady. It makes life a lot easier if you want to roll your Litter Genie out of the way when it's not in use.
You will need some hardware. Please consider supporting non-Amazon businesses when you buy anything:
1) A set of these furniture casters with 1-inch wheel: https://www.aliexpress.us/item/3256805245042421.html (Note that the caster's mount plate is 39x33mm, and the screw holes are 24mm across center-to-center)
2) 20 M3 x 12mm socket head cap screws, such as https://www.ebay.com/itm/126517083783
3) 20 M3 hex nuts, such as https://www.ebay.com/itm/116208880811
You might be able to get away without supports. If you do, use tree supports with barely any first layer expansion so they're easier to remove. I also recommend using Orca Slicer's counterbore hole feature set to a sacrificial layer.
This will use a TON of filament, so either use an inexpensive one or paint it. The filament in the photo is Mika3D black/gold silk. Probably overkill for this but I needed something that'd go well with existing hardware in the room.