Bottle beer holder (extendable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bottle holder that fits bottles with a diameter of 60 mm (regular size).
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 150
- Wydruki
- 1
- Wyświetlenia
- 1139
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
About
This bottle rack holds 5 bottles with a diameter of 60 mm. The cylinders have a diameter of 62 mm and fit the regular beer bottle.
On the side of the model there are four holes where you can put a plug or magnets (6mm * 3mm) to attach them together. Other option is to glue them.
Print instructions
Based on one print run: PLA, 0.2 mm, no support.
Print flat on the bed, the height should be 60 mm.
Versions
Let me know if you need an adjusted/different version.
Other kitchen storage designs:
- Dispenser for bouillon cubes
- Rack for square spice/herb containers (40 x 40 mm)
- Rack for square spice/herb containers (60 x 60 mm)
- Rack for square bottles
- Rack for vitamin c tablets