1 / 3
Ender 3 Webcam Mount — zdjęcie 1
1 / 3

Ender 3 Webcam Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A webcam mount for the left side of the Ender 3/Pro.

Ocena
4,5 / 5
Polubienia
15
Pobrania
101
Wydruki
2
Wyświetlenia
634
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a webcam mount for the left side of the X axis on the Ender 3/Pro.

 

Instructions:

Remove the X axis endstop bracket from the printer

Be careful, the X axis stepper may fall once all 4 screws have been undone

Unplug the X axis endstop cable

Undo the 2 Philips head screws that hold the endstop switch

Transfer the endstop into the new camera mount/X axis endstop bracket and screw in using the philips head screws

Be careful not to overtighten them, the plastic may crack

Redo the 4 screws to reattach the endstop bracket to the X axis gantry

Plug the cable back into the endstop

Place your camera on the arm and angle it to your liking!

Tagi