Spoolholder with ball-bearings for big spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Spoolholder optimised for big Filament Spools on an Ender 3 Pro.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 623
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A filament spool holder optimized for big and heavy spools for a Creality Ender 3 Pro.
With the help of an integrated thread it can be fixed on the current arm and with two classic ball-bearings the spool can roll freely.
With the indentations on the rolling-part the spool can't roll off. This part is hollow so you can add a (4,2mm diameter, 126mm length) rod for extra strength.
Tested with up to 2,3kg spools of 3D Jake EcoPLA.
A Prusa Printer Edition can be created if you give me the dimensions for the current spoolholder or you can remix my design.
If needed, i can publish the Solidworks Design too.
Prints with almost no supports.
Comments say, that the nut should be printed at 105% in x- and y-directions for better fitment.