Ice fishing Panfish Bait mold - Flying Bait
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mold designed to inject your own bait for ice fishing or fishing for panfish or other small fish
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 842
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is a mold that i put together for an idea I had for a bait concept. It is designed so that a standard size injector for bait making will fit the opening. This is designed to be clamped by a quick clamp to hold the two halves together.
One word of caution, the plastisol that will be injected will be very close to the melting temp of the print, so try to not use too much pressure while injecting. Also these molds take quite a bit longer to cool, so it may take a while before you can open the mold.
If this is something you enjoy let me know and i can release some of my other models as well.