Neptune Y Axis Belt Tensioner Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lock for the Neptune 4 Plus Y-Axis belt tensioner that has a locking clip to prevent vibrating off.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I recently upgraded to a Neptune 4 Plus, and noticed the tensioners reportedly have a tendency to loosen. I tried a few of the existing tensioner locks, but they seemed to have nothing to prevent them from sliding off due to vibration.
After trying a few different approaches I cam up with a simple two-piece design that has a clip that lifts up and down to go behind the adjustment knob and prevent sliding off. It also unlocks and slides off easily using a single hand.
Be sure to check out the X-Axis that goes with this: https://www.printables.com/model/941436-neptune-x-axis-belt-tensioner-lock
Tested on a Neptune 4 Plus, but should also work for the 4 Max and the corresponding 3 versions. If anyone tries this out on the other models, please leave a note in a comment.
Printed with supports and .2mm layer thickness.