HSW Handled Case Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A honeycomb storage wall compatible holder for molded plastic cases with handles.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a hanger designed specifically for my hakko desoldering gun in its case, but could easily hold any other similar plastic case or really anything that you need a wide flat hanger for. I didn't see anything similar for the HSW storage system so I thought I would upload it in case you, too, need to hang your hakko desoldering gun on the wall.
The hanger itself is 75mm wide and 55mm from the wall plate to the rear of the raised lip, so if your case (or other object) will fit on that it will work for you.
I recommend printing it flat for maximum strength and with support enabled for the HSW connection lugs.