Micron+ Rear Skirt for FIltered Inlet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modify published rear Micron+ (180) rear skirt to use a filtered inlet of the type that full-size Vorons use.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Skirt is nice and symmetric with just the hole for the inlet. Unlike other versions that accept the filtered inlet, no hole for the ZF-type toggle switch - I did this because I moved this switch to the side of my printer.
To hold the inlet in, two heat inserts on the inside of the skirt.
Disclaimer - I am running this skirt on my printer, but the heat insert holes were the wrong size. So I updated the model to accept Voron-standard heat inserts, but have not tested it myself.
Compatibility
Not sure I can keep this section up to date, but at publishing time this is compatible with:
- Micron+ r0 build
- Micron+ G2Z build
The r1 has different skirts and the Z motors are way different, so this will not fit.
BOM
2 x M3-5x4 threaded inserts (Voron-standard)
1 x TycoElectronics 10EGG1-1 or 10EGG1-2 filtered inlet