1 / 1
Red Lizard Whiptail Cave
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
A cave I made for my Red Lizard Whiptails to breed in. The files are a housing for the caves and a cave file. You will need to print one housing and 8 caves for the full setup. There are “wings” on one side of the housing, this is meant to be put in the sand to keep the cave from moving.
Although a bit expensive, I printed all of these parts with 100% infill to make sure there was no chance of it floating. This is probably a bit overkill and you could get away with maybe 6 walls and 50% infill, but your mileage may vary.
If you have any questions, please feel free to leave a comment.