Kobalt CaseStack Tool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side mount Tool carrier for quick access to commonly used tools
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 685
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a tool holster I made with my specific use case in mind. The top rail has two larger slots meant for my ¼" 90 adapter and my bit driver handle, then two small slots for smaller screwdrivers. Then a slot made to hold pliers or side cutters and a Zip-Tie holster.
The bottom rail is made to have 8 ¼ " slots with 5 being passthrough slots to accommodate quick change adapters, and the final slot was made for a small ratchet .
I intend to make some changes to this model as the zip-tie holster is problematic with the openings and the ratchet holster is going to be changed to a slotted mount.
Pictured model was printed in Creality Blue PETG