Wall Hook Surf Look
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Wall Hook or Curtain holder in the shape of a surf fin with a single hole, fit for 4.5mm screws at the largest.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A wall-mountable hook in the shake of a surfboard fin to bring the surf aesthetic into your home. They work great for hanging coats, but I personally use them for hanging a blackout curtain. These grommets in 40mm inner diameter work perfectly to hang on the fin.
Printing advice:
For stability, print on the flat side/the back and use a large nozzle and high layer height. I used 0.6mm nozzle with a 0.35mm layer height. Additionally adjust the setting for the seam to be at the top of the fin, so you don't see it regularly, the random setting can make this object a lot less smooth. I printed in PLA and it worked great.
The hole measures 5mm but with tolerances only fits 4.5mm screws.