Paint pole threads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a cylinder with paint pole threads
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 687
- Wydruki
- 1
- Wyświetlenia
- 1086
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I am told there is no standard for paint pole threads, but this fits the two paint poles and the broom handle that I have. This is just a threaded cylinder to use as a starting point for your model. I am including the .stl file and the .f3d file from Fusion360 so you can add to the model to help with your design.
edit: 30 March 2025 - adding the .step file as well.
Here are the settings you need to recreate the threads in Fusion 360:
Under "Solid" click on Create, then select Coil. Select a plane, then the 0,0,0 point, 20.0mm is the diameter you want. Then the dialog box comes up:
Change the Type to "Height & Pitch"
Diameter - 20mm
Height - 35mm
Pitch - 5.2mm
Angle - 0.0
Section - Square
Section Position - On Center
Section size 2.00 mm
Operation - New Body
Click OK