Weight Keeper for Scuba or Freediving Weight Belt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps your weights and other gear from sliding around.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 540
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Weight Keeper for Scuba or Freediving Weight Belt
I recreated this weight keeper to closely match the ones from Hog or Edge. I know they only cost around a dollar a piece, but for a few cents worth of plastic, you can also save a trip to the dive store or shipping.
These weight keepers fit the standard 50mm weight belts, and are designed to keep the weights and other gear on your belt from sliding around while you're diving.
Print these in PETG or ASA as they will be exposed to salt water and lots of sun.
Layers - 0.2 is fine; the top surface might look a little better with a shorter layer height.
Infill - doesn't really matter, but I used the default 15% grid.
3 perimeters and 4-5 top and bottom layers