Wall mounted Helmet Holder v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounted helmet holder that puts pressure on the inside of the helmet, not on the neck.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 141
- Wydruki
- 1
- Wyświetlenia
- 1363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the v2 updated version! (Old version: thing:6591051)
I learned how to use OnShape and wanted to redo this design as I quite like it.
I couldn't find a helmet holder that wasn't bulky or one that didn't put pressure on the foam that touches the neck and didn't want that foam to flatten so I designed my own.
I designed this holder to put the pressure just above neck foam as that part doesn't touch your head so it shouldn't matter if that foam flattens eventually.
Living in a rented unit I also designed it to use two large Command strips to be make it removable.
I have also made a version with 2 screw holes but this one is untested, would be happy to hear anyone's results if they print this.
Designed to print without supports. It printed fine on my Ender 3 v2 which usually gives poor results.