1 / 5
Beer Can Lid/Soda Can Lid/Bug Cover (no supports needed)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this lid to keep bugs out of your canned beverage. Reusable lid snaps onto 0.5L & 0.33L cans with a sliding cover.
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 458
- Wydruki
- 3
- Wyświetlenia
- 2511
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (56)Powiązane
Description:
I've found EcoDads idea pretty useful as our family often has the problem of bugs in the drinks, but after printing the first ones I found it was a hassle to put on and take off. To be able to easily change the model and to add names on an arch i remodeled the design in Solidworks.
Printing and assembly instructions:
All the original recommendations/instructions can be applied.
I've only tested the parts printed in PETG.
Usage instructions:
- Open your can
- Hold the lid by the tab between your index finger and thumb
- Place the front of the lid onto the rim of the can
- Pull the lid backwards and downwards until it snaps in place
- Rotate the can lid so that the opening in the lid is over top of the opening in the can
- Slide the cover closed when not in use
- To remove, lift up by the tab.
