Avent Natural Bottle Screw Ring Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy-to-print tray with small footprint for storing up to 6 screw rings for Avent Natural Bottles
- Ocena
- 4 / 5
- Polubienia
- 21
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 362
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Easy-to-print trays to store the bottle screw rings from the Avent Natural & Natural Response product lines of Philips. There are individual STL files for the storage of one up to six at a time so you can choose whichever fits your space - or the amount of screw rings you have - best, e.g. instead of printing the x6 tray, you can also print two x3 trays and place them side-by-side. Even the longest tray is printable on a standard print bed size.
PLA works fine. If you want something more suitable for exposure to humidity, PETG is the more suitable material. But the design permits excess water from the screw rings after hand washing to drain out of holes in the bottom. It's recommended to put a kitchen towel beneath the trays that soak up any remaining water droplets.
Recommended print settings:
- 0.2mm layer height
- 2 walls
- 15-20% infill
- No supports
- No additional bed adhesion options necessary