1 / 6
DPS3005, DPS5005 or RK6006 Power Supply case with fan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DPS3005, DPS5005 or RK6006 Power Supply case with fan and USB C PD module.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 738
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
Modified 3D model that allows adding a fan for better cooling. Due to the use of the power module RK6006 with bluetooth, the possibility to add a USB module for communication was removed, which in turn made it possible to add a 3006 Axial Fan.
For easier Power Module removal, holes for pin were added on both sides.
There are two options to choose from:
- Option A: Power_Supply_no_switchV3.stl for Binding Post
- Option B: Power_Supply_no_switchV3_oldPlug.stl for Studded
Recommended parts:
- RK6006 Power Supply module or other compatible
- USB C PD module
- 3006 5v Axial Fan
- Cable 0.25mm2 – 20cm black, 10cm red and 10cm green
- 4x 0.25mm2 Pin-shaped cable lug
- 5x M3x10mm screw + 5x M3 nut
- Option A: Banana Socket 4mm red J.50012.1 and black J.50012.2 or other
- Option B: Banana Socket 4mm red J.40018.1 and black J.40018.2 (not tested) or other
- 4x Self-adhesive Rubber Feet
- USB C Power Brick (20V output)
I recommend also buying JST XH 2pin for the possibility of shortening the cable from the temperature sensor.