Gridfinity Sealey 3/8th Inch ratchet holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Gridfinity compatible ratchet holder made for the Sealey premier 3.8th inch ratchet
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I have been on a quest to fill my toolbox at work with my own new tools finally, leading me to have to organise them to my own dismay. decided to use gridfinity as a base to organise. I have made a few storage boxes for my tools now but this one is my favourite.
Its made specifically for the Sealey premier 3/8th inch ratchet and holds it securely but gives enough room to get even my fat fingers in there to take it out; even when my hands are covered in grease or oil.
Can print in PLA at a 0.25 layer height and still printed great and a lot quicker. I would use 10% infill but I used 5% for some more speed in print and its holding together fine. This was all printed on a Kobra 2 Neo.
let me know in the comments what I could do better with the print and also my uploads and descriptions :D
EDDY