MPB - 100W Flashlight Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the Flashlight/floodlight module for my Modular Power Block
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is the Flashlight module for my Modular Power Block, This can be combined with all the large current modules of the MPB. For the base unit this model gets attached to, see here.
The battery life can be several hours, depending on the used battery, Cooling won't be an issue for this lamp, unlike most high power flashlights that can be bought. The modular design also allows for easy switching between different Lamp heads. The 100W Led is just the recommendation. 100W, 50W, Even Dangerously powerful UV LEDs fit into the Lamp head.
Depending on the Lens used, the light range can be several hundred meters. The Large and heavy MPB Base unit allows it to act as a standing lamp, the powerful LED scattering from the ceiling can illuminate most rooms.
Feedback, remixes and improvement suggestions are appreciated.
Print Notes:
all parts are 0.6mm nozzle compatible
min 1,2mm wall
15% Honeycomb infill was used for reference
Supports/Brim up to your judgement
The model was designed for PETG filament.
The tolerances of the M30 Thread are tight. Make sure your printer is well calibrated or keep a file/ tap and die set on hand.