xBloom Studio Accessory Caddy / storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
storage for xBloom Filters, omni dripper 2, and xPod Dock
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 2120
- Wydruki
- 2
- Wyświetlenia
- 7242
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
xBloom Studio storage for xBloom Filters, omni dripper 2, and xPod Dock.
I was looking for a compact storage solution for all my xBloom attachments. I wanted it to be able to mount to the machine itself as I was using a rolling base and wanted everything all together.
Caddy mounts to xBloom using friction fit in the recess right behind the grinder. Xpod slides in from the top. just below is the Omni Dripper 2 (with Dweller's Pusi Negotiator)and then Filter storage on the bottom.
checkout the Pusi Negotiator
Print settings:
Printed at .28 layer height
3 walls
3% infill adaptive cubic.
top mount could uses an optional drop of CA to keep joint seated. depends on printer tuning. for me it was a little loose but holds without the glue.
(did print with lighting infill but sidewalls were a little flexible. would up wall count if you print with no infill. )