Mercedes GLE v167 MagSafe tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tray for iPhones (excluding plus and pro max) allows to integrate genuine Apple MagSafe charger into MB GLE 2020-2024
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
[It's a hobby model, use at your own risk, no warranties are provided or implied.]
A custom-designed tray with spaces for the rubber inserts on the sides and the bottom.
It's firmly held in place by the friction of the rubber against the walls and the bottom and is made to exactly match wireless charging pad place of Mercedes v167 GLE.
No glue or anything like that is required. Remove the existing rubber pad and put the tray in place. The 3D model will be posted on some public exchange within a few days.
Only tested on US 2024 GLE, may work on 2020-2024 GLE/AMG/GLS.
What you'll need:
- Rubber strip you can cut to fit the rubber sections on the print. Used for this print: https://www.amazon.com/gp/product/B08Y7NJJ5C/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
- Original Apple MagSafe charger. https://www.apple.com/shop/product/MHXH3AM/A/magsafe-charger.
- PETG or something with even better temperature resistance for hotter locations. Used for this print - California Matte Black https://californiafilament.com/products/matte-black-petg-filament-1-75mm?_pos=1&_fid=45148e5a9&_ss=c (base) and Overture Space Gray https://www.amazon.com/dp/B07PGXY9Z3?psc=1&ref=ppx_yo2ov_dt_b_product_details (logo).
- MagSafe skin if you want to cover its white circle. Used for this print: https://dbrand.com/shop/skins/apple-magsafe-charger-skins#/customizer/details
For printing:
1. Use whatever settings get you best surface color AND dimensional accuracy as some tolerances are rather tight. If you can't the measurement right with your materials, try adjusting XY compensation.
2. Print on its bottom part. For PrusaSlicer, set supports to “Everywhere” and Overhang to “10%”, so you'll only get the support at the rubber mounting points.
3. 3 models are provided - tray, logo, and the unibody. Tray and Logo can be merged together as parts for multi-color printing if necessary. Also, if you don't want the logo, you can just print the tray model.
For mounting, cut the rubber, inset it into appropriate places on the sides and the bottom, remove the original rubber pad from the car. Check the photos on how to start, angle it from the bottom right corner of the tray and push it inside, make sure it's bottom border rubber touches the bottom of the car tray and it's pushed all the way down on its lower border and all it's corners.