Enforcer Replacement Gearbox Mount and other parts

The files I made for the Adventure Force Enforcer Maxim mod. I don't have a comprehensive hardware list but I did use the following supplies: M2.6 screws of various lengths, M4 bolts to mount the gearbox, 50mm OD orange PVC for the barrel, 3mm bungee cord for the box holder, and a spring I found in an assortment set for the ratchet. And for all the parts that required a pin to rotate I used cut down paperclips: Belt links, flywheel cage roller, box holder flipper,  ratchet pawl. And of course to wire it you will need 18 gauge wire 3 micro switches, two flywheel motors and a pair of flywheels. The gearbox I found was from aliexpress and had M4 screw holes along it's top and bottom. I included a picture of the manufacturing specifications but  there are a ton with the exact same mounting holes so as long as you find one that looks similar it's probably close enough. The model I use is a 12V DC 470rpm gearbox.