Timemore 078 passive slow feeder/restrictor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add on to the stock hopper, stealth slow feeder for the sculptors
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 1165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
UDPATE: I wanted to improve on this further but hit a wall (i had already tried 12-15 concepts) and decided in the end to design a hopper. If you want to give this a shot obviously feel free but if you want to go all in, check out the hopper on my profile :)
--------------------------------
I've been using this non stop for a couple months and i think it does a decent job. You need to take off the hopper and push this part into the slot from the bottom. Popcorning is nearly gone, when it does happen it seems to hit the underside of the printed part and fall back in so its an unintentional feature haha. Its not perfect though, it does clog 1/3 times when dumping a full dose for grind so you have to poke the dose with your finger to get it going again. What i do is take 2-5 seconds to pour in my dose and that works perfectly (so basically a quicker slow feed for you)
Note: Mirror the model to have the hole on the bottom right rather than the bottom left before printing, that was slightly better for me as it fed beans in the direction of the auger's movement rather than against it
I'll fill this text better when I have time to do so and add more pictures.