Torture test with an actual purpose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Torture test as well as a convenient tealight holder, all packed in one model
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
The abomination you are looking at is a torture test which I modelled for a competition, where the main objective was to keep in mind for it to have another purpose apart from what it is originally intended for - benchmarking your machine.
I came up with an idea to combine it with a candle holder, which I thought was the best one there could have been.
Sadly, the judges thought otherwise.... But that is not important.
Let's focus on the properties.
This came to existence thanks to Fusion 360 and my patience.
What is it intended to test?
- XYZ dimensions accuracy
- Overhangs up to 10°
- Bridging up to 86mm
- Cooling
- Stringing
How to appreciate its second purpose?
Insert a standard tealight into the socket at the top.
HOWEVER, since it is made of plastic, which can be easily melted by the heat, heatsink of sort had to be designed too.
This is solved by the best off-the-shelf coolant - water. Pour some to the ‘pool’ on the top, surrounding the candle. Make sure it covers good area if the tealight's side. This way, the heat gets absorbed by the water, not by the plastic.