1 / 2
Miele W1 washer / T1 dryer door prop clip — zdjęcie 1
1 / 2

Miele W1 washer / T1 dryer door prop clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A clip to hold Miele washer/dryer door slightly open to allow air to circulate inside when not in use.

Ocena
0 / 5
Polubienia
11
Pobrania
89
Wydruki
1
Wyświetlenia
539
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Inspired by wenjuk's Miele door holder, which I tried, but found it was a bit too fiddly to use, so I decided to design my own version that stays clipped on the door latch when the door is opened, so it doesn't fall to the floor.

My washer (WCR870WPS) has slightly narrower latch than my dryer (TCR790WP), so there's two versions of the clip. Clips are blank, but on next print I would add washer/dryer text on them for easier indentification.