License Plate Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2 piece License Plate Frame with a chamfered design
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 567
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have designed a 2-piece license plate frame for US plate sizes. Because the Bambu build sizes aren't big enought to fit a whole plate, this design does not connect at the top or bottom it goes from the screw holes on the top and bottom and wraps around the sides. I know different states have different positions for their renewal stickers, but my state is in the top right corner so
I tried to have as minimal overlap as possible so it wont get in the way. The frame is symmetrical so two identical pieces make up the whole frame. I use ABS for the filament to help with durability being out in the elements. I have not tested in in below freezing temperatures or in the summer heat but I will update when it does. ASA may also be a good option for filament.
If someone can share sizes of the plates from their country outside the US I can try to make a version for those as well.