Gridfinity tray for the Japanese Engineer PA-09 crimping tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity system compliant tray/holder for the Engineer PA-09 open barrel terminal crimping tool.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 181
- Wydruki
- 5
- Wyświetlenia
- 600
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Gridfinity compliant, low-profile tray/holder for the genuine Japanese Engineer PA-09 open barrel terminal crimping tool. Printed in PLA with a 0.4mm nozzle and 0.2mm layer height.
Please note that the original Taiwan knockoff PA-09's will not fit in this tray since there are significant differences in the physical outline of those two. If you want a Gridfinity tray for those, look here:
https://www.printables.com/model/922931-gridfinity-tray-for-the-taiwan-engineer-pa-09-crim
I did not completely design this tray from scratch. I used schenklooza's excellent Gridfinity Parametric Blank bin as a starting point:
https://www.printables.com/model/492701-gridfinity-parametric-blank
A big thanks to schenklooza for his thoughtfully designed and incredibly useful blank. It saved me a ton of work. The tray is 2 Gridfinity bins wide by 5 long and 1.75 Bin units high (approx. 23 mm overall).