Moccamaster KBTS 8 cup Mug Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brew coffee straight into a mug.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This mod allows you to brew your coffee directly into a mug. I typically only drink one cup of coffee a day, so brewing into the carafe is just an extra step and an extra dish to wash. There are two pieces: the spacer that centers your mug under the basket and presses the safety switch, and the riser that reduces splashing. If you are using a taller travel mug, the riser can be removed.
I printed this with basic PLA, so the heat from the coffee has caused a ring to form on the riser. The walls are 4mm thick to help keep it from warping too much over time.
User Parameters
riserHeight - the default riser height is 45mm