1 / 4
Plug to close off exhaust on the Qidi Q1 Pro
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a plug to close off the chamber exhaust to keep the heat in when heating the chamber.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 767
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
I made the chamber fan duct and filter holder and wanted to also be able to close it off to keep the heat in better when heating the chamber. You can get the related parts here https://makerworld.com/en/models/411229?fbclid=IwZXh0bgNhZW0CMTEAAR3f0M9DgXlkferK0tAFzDghmkW5zvwlpZ_0zBMjcjAj5kIBMrbzlP3vYic_aem_Yo-cguwd-8sszccZO92pzQ#profileId-313181
You can get the activated carbon filter box I made to fit the holder linked above here https://www.printables.com/model/944790-activated-carbon-filter-box