Neo Geo MV1B Vertical Mod Shell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model I designed in order to facilitate the vertical modded MV1B This is in Alpha.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Version 2 is out now resolving some minor fitment issues and making the insert areas thicker for rigidity.
Print the top model at an angle, or on it's side or you'll get that weird squared stepping pattern you see in my print, printing sideways/at an angle makes it flat as it's supposed to be.
This is a model I designed in order to facilitate the vertical modded MV1B so it's similar to an MV1C.
This build uses the Tian Feng OMVS board.
If you're using a neobiosmasta, you may have trouble getting the case to close, it will, but it can be difficult, just go slow when screwing the top down.
Kits can be purchased at pixelknightgames.com
You'll need the following:
2 x M2 4mm Screws
2 x M2 nuts
4 x M3 30mm Screws
6 x M3 4mm threaded inserts
2 x M3 4mm Screws