DEEJ
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on a deej case
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my take on a deej case. If you don't know about the project check it out on GitHub here you can also find the wiring diagram.
Part you will need:
- Slider potentiometer 75mm (5pcs)
- Arduino Nano Usb-C NO WELDING (1pcs)
- Fader caps
- M3 metric nut (4pcs)
- M3*8mm (4pcs)
- M2*12mm (10pcs)
- Wire
Optional
- M3 any size up to 8mm (1pcs)
To wire everything please look at the wiring diagram linked above.
The optional screw is for securing the arduino but it can also be held in place with a little bit of glue. In potentiometers not a thread you must make it with M2 taper.
Soft Ware
I used program Dot-X to connect with computer, but you must flash Arduino witch DotMatrixLabs – MCU flasher.
Print Settings
- Rafts:
No
- Supports:
Yes
- Resolution:
0.2
- Infill:
15%
- Filament brand:
Aurapol
- Filament color:
Black
- Filament material:
PLA
- Notes:
I printed everything with 3 walls.