Folding Under Cabinet Banana Hook (Thickened)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original Description: Mount this in your kitchen to keep bananas fresh and out of the way. Folds up when not in use.…
- Ocena
- 4,5 / 5
- Polubienia
- 47
- Pobrania
- 334
- Wydruki
- 3
- Wyświetlenia
- 1001
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Original Description: Mount this in your kitchen to keep bananas fresh and out of the way. Folds up when not in use. Base requires supports when printing.
I ended up breaking two of the original bases (one at 20% and one at 100% infill) while removing the supports and testing their strength (relatively gently). They both broke at the same spot in the middle of the C part on the base.
Changes:
- I've thickened the back area of the base where it was breaking and it's super strong at 50% infill. There are a few artifacts from using MeshMixer to reinforce the base, but it prints and looks fine.
I mounted mine with adhesive foam tape.
Thanks to heytiger for the awesome design.
Print Settings
Printer Brand:
LulzBot
Printer:
Mini 2
No
Supports:
Yes
.25
Infill:
20% for arm, 50% for base
Notes:
Cura Options:
- Supports Everywhere
- Default LulzBot HIPS Medium profile (240 tip/110 bed temps)
Meshmixer to add the reinforcement and NetFabb for final repair
Category: Kitchen & Dining