1 / 4
Humidifier for Ovation guitar with small sound holes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a Ovation grape soundhole compatible humidifier
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The normal guitar humidifiers was made for the large sound hole guitars, and they does not fit to the Ovation leaf design guitars, so I decided to make a small one of it which fits to it. The outer diameter is 39mm so it fits to my Ovation Celebriry's 40mm wide soundhole. Recommended to measure your guitar soundhole and scale it up or down a bit if needed.
after printing you need a small piece of foam and drop a small amount of water to it, than put tha cap on and put it to the guitar