1 / 3
Iconic power fist - 2 color — zdjęcie 1
1 / 3

Iconic power fist - 2 color

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Iconic shape extrude to great a display piece, looks great at 8in and 4in sizes

Ocena
0 / 5
Polubienia
2
Pobrania
34
Wydruki
0
Wyświetlenia
235
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Pick your favorite colors and print the base and fingers separately then glue together all set.

It's a little wobbly so I made the base

How I print:

  1. Print with “mouse ears” on the sharp corners or your top surface might suffer.

  2. 0.28 layer heights till the last 10 layers going down to 0.20 for the rest of the print.

  3. I turned off top layers for the part that is going to be covered by the fingers and palms

  4. I used Gyroid infill for the lower layers and upped it to 15% before the top layers