Aoxun Outdoor Storage Shed - rook peak guard - replacement for part "GE"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The roof peak guard parts for the Aoxum Outdoor Storage shed become brittle and break. Replace them with this print
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
The roof peak guard parts on my 6.4x4' Aoxum Outdoor Storage shed became brittle and broke (well, maybe because the shed fell over, but who's really to say?).
Designed this to be thicker than the original part (2.5mm instead of 2.0mm) and made everything else about the same.
Printing
I suggest printing these in ASA if you can, but if you can't print ASA, PETG would be a great second choice. I prototyped in PLA, and may just leave the PLA version installed to see hoe it fares.