RatRig VCore 4 BTT PITFT50 Screen Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I created these models to add a BTT PITFT50 screen to the bottom of my RatRig VCore 4.
The screen mounts (slider_mount_l and slider_mount_r) attach to the bottom of the front extrusion using M6x20mm screws and T-Nuts.
4 x M3x4mm SHCS are used in the side of the screen enclosure (siding_BTT_PITFT50_v2.1_mount) to engage with the mounts and allow it to slide.
Route a long ribbon cable under the bottom of the printer, using ribbon_cable_support if desired (use 2 x M6x12mm bolts and T-Nuts) and into the electronics enclosure.
All of the files should be oriented correctly for printing.
I've included only the .step files since that's what I prefer and incase anyone wants to make changes.