Upgraded parametric FreeCAD Template for Gridfinity Bins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made some improvements in orginal project. Dividers, and other changes.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 185
- Wydruki
- 2
- Wyświetlenia
- 592
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I needed to make a few changes to the original design, which offer great possibilities. Changing the handle angle allows you to print with an overhang of ex. 70, or create bridges at 90. Bridges work great with dividers, which can be configured in unusual ways that allow you to create asymmetrical boxes. Changing the scoop angle in addition to adjusting it allows you to create just a plain flat wall on the pick side of the parts.
Great thanks to Groon for his project. He allowed me to look at freecad from a different perspective.