1 / 4
LCD cover for Anet ET4x logo (using magnet to hold) — zdjęcie 1
1 / 4

LCD cover for Anet ET4x logo (using magnet to hold)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Anet ET4x series LCD Cover. Supports only on screen base. improvements over the original LCD cover for Anet ET4 logo…

Ocena
0 / 5
Polubienia
0
Pobrania
20
Wydruki
1
Wyświetlenia
203
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Anet ET4x series LCD Cover. Supports only on screen base.

improvements over the original LCD cover for Anet ET4 logo by Fran86 for the ET4x series (https://www.thingiverse.com/thing:4612438)

-Completely closed base.

-Base of the same diameter and radii as the cover, included to put the clip.

-Letters ET4x on the cover.

-I have not print test it

-You guy can use drill to make 4 hole at the conner and put the 5mmx2mm magnet.

Print Settings

Printer Brand:

Anet

Printer:

A4

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2 mm

Infill:

10%-100&


Filament:
https://shopee.vn/Cu%E1%BB%99n-nh%E1%BB%B1a-in-3D-1.75mm-PLA-1kg-thu%E1%BA%A7n-kh%C3%B4ng-pha-i.33866900.1416342390 PLA Gray

Notes:

Use drill to make 4 hole at the conner and put the 5mmx2mm magnet. The cover can hang over screen by magnet connect to the screw on the back of the lcd screen

Category: 3D Printer Parts

Tagi