1 / 1
Sherpa Mini Filament Cutter — zdjęcie 1

Sherpa Mini Filament Cutter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of The Printing Sharks filament cutter to be simpler, and move the spring to be internal.

Ocena
4,5 / 5
Polubienia
68
Pobrania
428
Wydruki
1
Wyświetlenia
2813
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Remix I made a while back for my own printer. This simply moves the spring inside of the cutter and combines the body into one piece. Because the body is one piece I designed in supports. These should be easily removable through the filament path, and by using the same #11 blade to “scrape out" the thin disc where the blade will move. I included one body that uses m3 heat insets and one without. The “lid" is untested, I don't use this in my design. Given the nature of this kind of item customization will probably be necessary, and this just to give you a head start. Most pen sized springs should work fine.