Bela Trill Bar Case and accessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Revised case design, trim pieces, and base for Bela Trill Bar capacitive touch sensor.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Trim pieces for the Bela Trill Bar case provided here. Revised case and case bottom are provided in this repo.
Designed to aid in tactile feedback when used as an input device, like with Bamtna's Joyslide. I ported the logic from bamtna's repo to micropython and added capability for a haptic feedback motor. code can be found here.
Case body has 3 versions - no motor, Adafruit 1201 motor, and 7x25mm motor.
Case bottom has recessed holes for rubber feet to prevent it from sliding around.
Sketches as .dxf's for the extrusion profiles of the case and trim piece are provided as well. A trim blank is provided as .stl to design your own.
Category: Electronics