Dart Zone Venom Quick Draw Kit by DMF
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual stage trigger for Venom blaster(REV 8.8.24) [NOTE: SAND PUSHER NUB ON QD TRIG TO ADJ PUSHER ACTIVATION DELAY]
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 107
- Wydruki
- 1
- Wyświetlenia
- 2366
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Get rid of the rear rev trigger with this dual stage trigger kit by DeadMansFoam. This relocates the switches on a plate that mounts on the gear box. Instructions are in the images provided. Some trimming is required. Mod your blaster at your own risk. This kit does not require electronic modification. ENJOY!!!! (TRIGGER UPDATE 8-8-24) ***DMF QD PRECISION FILES NOW AVALIABLE. New trigger files include a split lever assembly to correct the pusher position when the trigger is released. Switch plate is still needed to run this new kit. The levers have very tight operating tolerance and may need to be shaved to obtain desired results. See pictures for detailed instructions. The steps are the same from the original version. Both versions will be available. If you have any problems installing this kit please DM me.