Simple watch stand. Lightweight & resizable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple watch stand inspired by the ones that come with some watches, fits both bracelet and strap watches.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple watch stand inspired by the ones that come with some watches, fits both bracelet and strap watches big and small.
The holder has a D shape with a cutout for better fit and a bit of flex when putting a watch on or off. Has a subtle curve to keep the watch centered and an indent for the watch back.
Comes in two sizes: full size and a 90% scale.
The full size holder has a width of 45mm and a circumference of 190mm and uses 27g of filament.
The 90% scale holder has a width of 40mm and a circumference of 170mm and uses 21g of filament.
You can always do a custom scale to fit your particular watch better, its better to go larger than smaller for a better fit.
Printed in PETG for the extra flex and strength but PLA seems to work fine too.
No brim needed but if you have issues you can add one. Slowed down the outside walls speed for an even finish.