Color coding band for 1/4" hex sockets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Color coding band for hex sockets.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple band which pressed onto ¼" hex bits to color code.
Originally designed for SK hex sockets, but fits GripEdge hex sockets as well.
Including STL, STEP, and F3D file. Hex is nominally 6.5mm which is larger than ¼" but many printers undersize the holes, which works out well as you can use a conventional socket and a bench vise or arbor press to press these collars into place. Otherwise, open the F3D file in Fusion and adjust the hex hole appropriately.
Print any which old way you like, should be a very quick print so if you want it to look a little better, you can use a lower layer height. Otherwise draft defaults should be fine.