Rook 2020 MK2 Double Shear mod (BETA) [2020] [MK2]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for maximum power
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 137
- Wydruki
- 1
- Wyświetlenia
- 1053
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Additional strength with double shear on the motor mounts.
My personal MK2 is getting kind of crazy and I need more strength, so I'm going to try this out.
You'll need: (other than stock hardware)
- Slightly longer belts (12mm longer)
- 10x M3x25
- 10x M3x4x5 heatsets
- 2X M5x8
- 2x M5 T-nut
The left mount can use both the stock spacer or the provided spacer. Right motor mount needs the provided spacer.
I've included the STEP file with all fasteners included to help with installation.
I'll add more info after its been tested.
After testing, this works great! Now my next issue is bending the X rail :D