1 / 5
XL Debris Bucket - Low Profile for Ultimate Nozzle Wiper for Prusa XL Full Length — zdjęcie 1
1 / 5

XL Debris Bucket - Low Profile for Ultimate Nozzle Wiper for Prusa XL Full Length

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A low profile debris bucket that fits Double Ultimate Nozzle Wiper for Prusa XL in full length

Ocena
4,333 / 5
Polubienia
10
Pobrania
67
Wydruki
2
Wyświetlenia
654
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Why stop at individual buckets… I decided to make one great big one based off the extended low profile debris buckets I made. One large bucket will reduce the number of debris ricochets as the nozzle passes over the nozzle wiper. This also should catch more debris as well. There is slight gaps on the ends just like the individual extended bucket version but is minimal compared to the original length for debris buckets.

I used Surfalex2000's awesome position marker to align my silicone nozzle wipers. First, I installed my double ultimate silicone wipers. You may have to play with the large bucket or loosen and shift the screws to ensure the buckets flush when installing them. You can also use the original Timeless Doctor's Ultimate Nozzle Wiper Prusa XL instead if you just want a single silicone wiper.

Added 7/20/24 - one piece merged files